Press Holders

Versatile Press Holders

Press holders are a great marking solution for high volume production marking on flat surfaces. The press holder uses standard CMS step style type and can be configured for a wide range of marking legends. The design is durable and wear resistant.

If the configuration required is not listed, CMT has a complete engineering department to design a unique holder/tool just for your special application.

Request Quote
Press Holder

Press Holders Details

PressHolderP150.jpg
"Press Holder to hold (4) 1/8"" Characters"
$263.18 $236.86 Online Sale!
PA50

PA50 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/4" tall and 1/2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (8) 1/16" characters CMS06

b. (5) 3/32" characters with a 1/32" spacer (CMS0300)CMS06

c. (4) 1/8" characters CMS13

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2" (C) wide x 1" deep (D)

Type pocket 1/4" (B) tall x 1/2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (6) 1/8"" Characters"
$333.52 $300.16 Online Sale!
PA75

PA75 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/4" tall and 3/4" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (12) 1/16" characters CMS06

b. (8) 3/32" characters CMS06

c. (6) 1/8" characters CMS13

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2" (C) wide x 1" (D) deep

Type pocket 1/4" (B) tall x 3/4" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (8) 1/8"" Characters"
$351.31 $316.18 Online Sale!
PA100

PA100 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/4" tall and 1" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (16) 1/16" characters CMS06

b. (10) 3/32" characters with a 1/16" spacer (CMS0600)CMS09

c. (8) 1/8" characters CMS13

Tool length 4 1/4", includes standard length stamps

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2" wide (C) x 1" deep (D)

Type pocket 1/4" (B) tall x 1" long (A)

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (12) 1/8"" Characters"
$369.89 $332.90 Online Sale!
PA150

PA150 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/4" tall and 1 1/2" wide (as depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (24) 1/16" characters CMS06

b. (16) 3/32" characters CMS06

c. (12) 1/8" characters CMS13

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2 1/2" (2) wide x 1" (D) deep

Type pocket 1/4" (B) tall x 1 1/2" (C) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (16) 1/8"" Characters"
$405.76 $365.18 Online Sale!
PA200

PA200 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/4" tall and 2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (32) 1/16" characters CMS06

b. (21) 3/32" characters with a 1/16" spacer (CMS0600)CMS06

c. (16) 1/8" characters CMS13

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 3" (C) wide x 1" (D) deep

Type pocket 1/4" (B) tall x 2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (20) 1/8"" Characters"
$368.87 $331.98 Online Sale!
PA250

PA250 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/4" tall and 2 1/2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (40) 1/16" characters CMS06

b. (26) 3/32" characters with a 1/32" spacer (CMS0300)CMS06

c. (20) 1/8" characters CMS13

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 3 1/2" (C) wide x 1" (D) deep

Type pocket 1/4" (B) tall x 2 1/2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (8) 3/16"" Characters"
$335.32 $301.79 Online Sale!
PB150

PB150 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 5/16" tall and 1 1/2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (8) 5/32" characters CMS16

b. (8) 3/16" characters CMS19

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2 1/2" (C) wide x 1" (D) deep

Type pocket 5/16" (B) tall x 1 1/2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (10) 3/16"" Characters"
$394.15 $354.73 Online Sale!
PB200

PB200 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 5/16" tall and 2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (10) 5/32" characters with 1/8" spacer (CMS300) CMS16

b. (10) 3/16" characters with 1/8" spacer (CMS1300) CMS19

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 3" (C) wide x 1" (D) deep

Type pocket 5/16" (B) tall x 2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (16) 3/16"" Characters"
$442.63 $398.37 Online Sale!
PB300

PB300 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 5/16" tall and 3" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder either

a. (16) 5/32" characters CMS16

b. (16) 3/16" characters CMS19

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 4" (C) wide x 1" (D) deep

Type pocket 5/16" (B) tall x 3" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (6) 1/4"" characters"
$335.32 $301.79 Online Sale!
PC150

PC150 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 3/8" tall and 1 1/2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder (6) 1/4" characters CMS25

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2 1/2" (C) wide x 1 1/4" (D) deep

Type pocket 3/8" (B) tall x 1 1/2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (8) 1/4"" characters"
$442.63 $398.37 Online Sale!
PC200

PC200 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 3/8" tall and 2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder (8) 1/4" characters CMS25

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 3" (C) wide x 1 1/4" (D) deep

Type pocket 3/8" (B) tall x 2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (12) 1/4"" Characters"
$442.63 $398.37 Online Sale!
PC300

PC300 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 3/8" tall and 3" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder (12) 1/4" characters CMS25

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 4" (C) wide x 1 1/4" (D) deep

Type pocket 3/8" (B) tall x 3" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (4) 3/8"" characters"
$580.30 $522.27 Online Sale!
PE150

PE150 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/2" tall and 1 1/2" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder (4) 3/8" characters CMS38

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 2 1/2" (C) wide x 1 1/4" (D) deep

Type pocket 1/2" (B) tall x 1 1/2" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity
PressHolderP150.jpg
"Press Holder to hold (8) 3/8"" Characters"
$696.36 $626.72 Online Sale!
PE300

PE300 CMT Press Holder is a rugged marking tool for interchangeable type. The standard press shank retro-fits easily into a customer supplied press. Minimal investment is required to get up to speed in production marking. The stampholder is rectaugular for CMS step stype tpe and measures: 1/2" tall and 3" wide (not depicted in photo).

1. Solid steel body

2. Standard round press shank

3. Quick thumb release for easy and fast changeover of type

4. Integrated stamp holder to holder (8) 3/8" characters CMS38

Tool length 4 1/4"

Press shank 1 1/4" diameter x 2" long

Tool Body 1 7/8" long x 4" (C) wide x 1 1/4" (D) deep

Type pocket 1/2" (B) tall x 3" (A) long

Weight – 1 Lbs.

Operation Guide

FAQ


Quantity